Thermal oscillation module GEN1 instruction manual

Product and Manufacturer Description Product Description Opentrons Heater Vibrator Module GEN1 provides deck heating and orbital vibration. The module heats to 95°C and can shake samples at speeds from 200 to 3000 rpm. Manufacturer Description Opentrons Labworks Inc. 45-18ct Square W Long Island City, NY 11101

Safety information and regulatory compliance

Opentrons strongly recommends that you follow the safe usage practices outlined in this section and this manual.

The heater vibrator's rocker requires additional mounting—not just clamping it in the deck slot—to ensure it doesn't fall off the robot's deck. For details on how to secure the module, see the Setup Steps section of this manual or the on-screen instructions in the Opentrons application.

Safe Use Input and Output Connections The heater-oscillator has the following power input and output requirements, which are met by the supplied power supply block. WARNING: Do not replace power cords unless directed by Opentrons Support.

Power Supply (AC): ◾ Voltage: 100–240 V ◾ Frequency: 50/60 Hz ◾ Current: 4.0 A ◾ Mains Voltage Fluctuation: ±10% ◾ Overvoltage: Class II Heater Oscillator (DC): ◾ Voltage: 36 V◾ Current: 6.1 A These input and output requirements are also marked on the external power adapter.

Safety information and regulatory compliance

Environmental Conditions For best performance, Opentrons recommends using the Heater-Shaker under the following conditions: ◾ Environment: indoor use only ◾ Temperature: 20–25 °C ◾ Relative humidity: max. 80%, non-condensing ◾ Altitude: up to 2,000 meters ◾ Contamination: 2Heater-Shaker can be safely transported and stored at temperatures from −10 to 60 °C. Software Requirements Heater-Shaker requires OpentronsApp version 6.1.0 or newer and the OT-2 robot server.

Original address: Thermal Shaker Module GEN1 Instruction Manual.