User Manual: Thermal Cycling Module

Product and Manufacturer Description Product Description The Opentrons Thermocycler Module GEN2 provides on-deck, fully automated thermal cycling. This module automates upstream and downstream workflow steps. Manufacturer Description Opentrons Labworks Inc. 45-18ct Square W Long Island City, NY 11101

Safety Information and Regulatory Compliance Opentrons strongly recommends that you follow the specifications listed in this section and this manual for safe use. NOTE: The Thermocycler heats and cools very quickly during operation.

Safe Use Input and Output Connections The Thermocycler has the following power input requirements, which are met by the included power supply. WARNING: Do not change power cords unless in an orientation that is normally supported by Opentrons. Power supply (AC): ◾ Voltage: 100–240 V Frequency: 50/60 Hz ◾ Current: 8.5–5 A ◾ Overvoltage: Class II

Safety Information and Regulatory Compliance Environmental Conditions Thermal cycler should only be used indoors, on a solid, dry, flat, level surface. The thermal cycler must be installed in a low-vibration environment with stable environmental conditions (e.g., keep the thermal cycler away from direct sunlight or HVAC systems that may cause significant temperature or humidity changes). Recommended environmental conditions, acceptable use, and storage changes.

Full content: Click here .